Tim Freeberg
I am a mechanical engineer. I spent nearly a decade in medical-device research and development, then built state-licensed cannabis operations in Washington, often from bare land. In 2025 I co-founded BuiltCold.
Formal name: Jon Timothy Freeberg II. Academic work is signed Jon T. Freeberg.
What I do now
- BuiltCold. A business started around September 2025, grown out of a cold-email outreach system.
- Lead-generation sites. SEO websites for local service businesses.
Career record
Manufacturing engineer intern, ConMed Linvatec
November 2007 to October 2009. Production documentation: bills of materials, routers, and standard operating procedures. Equipment qualification, validation, and process improvement. Specified new equipment.
Graduate research assistant, University of South Florida
October 2009 to 2010, for Stuart Wilkinson, Ph.D. Research for the master’s thesis on quad-screw-drive all-terrain locomotion.
Research and development engineer, Stryker Sustainability Solutions
November 2010 to August 2013. On a new-product-development team obtaining FDA 510(k) clearance for reprocessed medical devices. Project manager for scope, budget, and timeline across research and development, operations, quality, regulatory, marketing, and vendors. Design control, FMEA, risk tables, functional analysis, SolidWorks models, and test-fixture specifications.
Research engineer, Medtronic
September 2013 to September 2016. On an R&D team obtaining FDA 510(k) clearances and launching new product lines. Early on, greenfield development of a 50,000 square foot manufacturing and research location. Project manager for several top-priority projects, and a member of a small skunk-works research team.
State-licensed cannabis operations, Washington
2014 to 2024. In 2014, while still working in engineering, I funded the conversion of a family country house and workshop into a state-approved cannabis producer and processor. The site had three 2,700 square foot greenhouses. In 2015 the facility was rented to businesses that needed an approved location.
In the fall of 2016 I moved to Washington. That season’s outdoor harvest was about 300 pounds dry, and more. In 2017 I built two Tier 3 outdoor licenses, approved by the state, on very little capital, and managed about a dozen independent grow teams as subcontractors under those licenses.
From 2018 to 2020 I took over the greenhouse operation after a tenant failed, built supplemental lighting and light-deprivation upgrades myself, and built additional outdoor grows and license-holding sites. I partnered with the Tommy Chong brand, developed my own brands, provided harvest services, produced and sold clones, built automated drip irrigation, and installed state-approved security systems as a paid side business.
From 2021 to 2024 I sold a license and property to fund a first all-indoor grow on a bare plot: a well, a larger transformer, a 50 by 100 foot fabric building, two 60-light rooms with a Gavita controller and a Netafim system. I also ran an outdoor grow for a harvest of about 1,000 pounds dry weight, then sold the grow building. I rebuilt an old two-floor barn, licensed it, and sold the license with a lease.
Mexico, and a search for the next build
2024 to 2025. Moved to Mexico in 2024, did sporadic consulting for Washington clients, and looked for a real-estate investment or partner. In 2025, moved again within Mexico, continued that search, and helped on a venture concept later set aside.
Co-founder, BuiltCold
Around September 2025 I co-founded BuiltCold, which grew out of a cold-email outreach system. I also build SEO lead-generation websites for local service businesses.
Photographs
In the workshop, the left window opens photographs from McCleary. The fabric building through the bay door opens an Oso construction-progression gallery, in order from phase 1 to phase 11. The pile of photographs on the bench opens farming photographs. The pegboard opens before-and-after photographs from Stanwood. The grey electrical panel on the back wall opens a gallery of electrical work and security-camera photographs.
Education and the thesis
B.S. Mechanical Engineering, Cum Laude, University of South Florida, 2003 to 2007. M.S. Mechanical Engineering, University of South Florida, 2009 to 2010. Engineer Intern (FE/EIT).
A Study of Omnidirectional Quad-Screw-Drive Configurations for All-Terrain Locomotion, Jon T. Freeberg, approved 26 October 2010. Major professor: Stuart Wilkinson, Ph.D. Committee: Craig Lusk, Ph.D., and Kyle Reed, Ph.D.
Download the thesis (PDF) · Thesis record
In plain language
Vehicles that run on two long screws, like giant screws laid on their sides, can move through mud, marsh, snow, and water, because the screws pull themselves through soft ground. They are weaker on hard surfaces such as pavement, and turning is awkward because the way you steer changes with the terrain.
This study asked whether four screws, arranged in different layouts, could keep the soft-ground strengths of a two-screw vehicle and travel more reliably on other surfaces. A single test rig could be rebuilt into each layout and was run on grass, dirt, sand, clay, marsh, snow, gravel, pavement, and water. A force-vector analysis was used to predict how each layout would behave.
The inline layout was the most versatile. It could move in any direction on every surface tested except water and pavement. It could still cross water, on the surface or submerged, and could handle pavement by rotating about its center.
Abstract
Double-screw vehicles have been developed to operate in soft, wet terrains such as marsh, snow, and water. Their exceptional performance in soft and wet terrains is at the expense of performance on rigid terrains such as pavement. Furthermore, turning can be difficult because the method of turning varies depending on the terrain. Therefore, in this study, several different quad-screw-configurations were proposed and tested to improve upon double-screw vehicles.
A test-bed was developed which could easily be converted into each quad-screw-configuration for testing on a variety of surfaces (grass, dirt, sand, clay, marsh, snow, gravel, pavement, and water). In addition, a force-vector analysis was performed for each screw-configuration to predict and understand performance in different terrains.
From the testing and analysis, the inline-screw configuration was the most versatile because it was omnidirectional on all surfaces but water and pavement. Regardless, it was fully capable of navigating water, both on the surface and submerged, and pavement by rotating about its center.
Quoted from the University of South Florida Digital Commons record for the thesis, digitalcommons.usf.edu/etd/3550.
Tools and methods
Named skills: SolidWorks, design control, MS Project. Used in the work above: FMEA, risk tables, and functional analysis; equipment qualification and validation; production documentation (bills of materials, routers, and standard operating procedures); FDA 510(k) clearance work for medical devices.
Contact
A public email is not listed here yet. For now, the best way to write is LinkedIn. BuiltCold is at builtcold.io.